|
A Controller with LCD Display and Remote Wiring/Relay Box
The Eco Plus is a two part controller offering significant wiring installation advantages with this two case system. The controller circuitry is located with the pump relay in one box, allowing easier connection of the sensor cables with shorter cable runs. This also allows a single, low voltage cable or standard 3 core flex connection to the wall mounted LCD Display Unit, again simplifying the installation and reducing wiring costs.
The circuitry incorporates the pre-programmed digital logic of the Eco Logic, whilst the addition of the separate LCD Display provides operating information such as Solar Panel and (up to 2) Water Tank Temperatures.
Availability will be subject to sufficient demand.
- Designed for 2 or 3 sensors, with single pump relay.
- Hands off efficient logic operation. Fit and Forget.
- Two case system for low cost and very easy wiring installation.
- Main circuit in standard moulded pattress like Eco Logic, with power-on and pump-on led lights and Sensor Calibration trim potentiometer.
- Seperate LCD Display Unit easily wired by single low voltage cable.
- LCD Panel information includes solar panel and tank temperatures.
- Attractive LCD Display Case.
The standard pre-programmed features are still being evaluated on this model but are likely to include:-
- Up to 10 degree differential temperature adjustable by potentiometer.
- Digitally smoothed sensor readouts for highly accurate sensing.
- Radio/ electrical interference suppression
- Pre-set maximum tank temperature.
- Pump on override for severe frost protection.
We can adjust these pre-programmable features free for clients who order in quantity, otherwise for a small nominal charge. Contact us with your specific requirements.
|
